10.1 Inch TFT Interfacing Touch Screen With Arduino 40 Pins
Product Details
| Resolution: | 1024 ( RGB ) * 600 |
| Size: | 10.1 Inch |
| Viewing Direction: | All |
| TFT Mode: | TFT, Transmissive |
Product Description
| | | |
| | Display outline size | 229.46 ( W ) × 149.2 ( H ) × 2.8 (D) |
| | VA size | 216.96 ( W ) × 135.6 ( H ) |
| | Resolution | 1024RGB * 600 |
| 4 | With /Without Touch screen | RTP |
| 5 | Interface | RGB |
| 6 | Brightness | 300cd / m2 |
| 7 | Color | 16.7M |
| 8 | Pixel Pitch | 0.2175 ( W ) * 0.2088 ( H ) |
10.1-inch TFT interface touchscreen is a common display device with a large display area and excellent display quality. It can be connected to the Arduino 40-pin development board to achieve human-computer interaction functions. Here is an introduction and usage of it:
Display Introduction
Display Specifications: 10.1-inch TFT touchscreens usually have a high resolution, such as 1280×800, 1920×1200, etc. It uses TFT (thin film transistor) technology and can provide clear and colorful image display. Some also use IPS panels, which have a wide viewing angle feature, maintaining good visual effects at different angles. The viewing angle can reach 80 degrees.
Touch Function: Most 10.1-inch TFT touchscreens support capacitive touch and can achieve multi-touch, such as 5-point touch or 10-point touch. The touch panel is usually controlled by driving chips such as GT928, GT9271, etc., and communicates with external devices through the I2C interface.
Interface Type: Common interfaces include LVDS, EDP, MIPI, etc. Different interfaces have different characteristics. For example, the LVDS interface can provide stable signal transmission, while the MIPI interface has advantages such as low power consumption and high-speed transmission.
Electrical Characteristics: The working voltage is generally between 3.0V-3.5V, the brightness is usually between 300cd/m²-900cd/m², the contrast is around 800:1-1000:1, and it has a wide operating temperature range, capable of working in the -20℃-85℃ environment.
Connection and usage of Arduino pin 40
Connection method: Connect the power pins (VCC, GND) of the TFT touch screen to the corresponding power pins of Arduino. Usually, VCC is connected to 5V or 3.3V. Connect the SPI communication pins (CS, RST, DC, MOSI, SCK, etc.) of the touch screen to the SPI interface pins of Arduino. The touch interface pins (T_CLK, T_CS, etc.) are connected to the digital pins of Arduino. If the logic level of the touch screen is incompatible with Arduino, a level conversion circuit may be needed. Purpose
Human-computer interaction interface: It can be used to create various control terminals, such as smart home control panels, where the control of devices like lights, curtains, and air conditioners can be achieved through touch screens; it can also be used for industrial control equipment, displaying information such as device status and operation parameters, facilitating operators to monitor and control.
Data display: In the data collection and monitoring system, the collected data is processed by Arduino and displayed on the touch screen, such as real-time display of temperature, humidity, pressure, etc. Charts can also be drawn to make the data more intuitive.
Education and development: Suitable for teaching experiments and DIY project development, helping learners understand the principles of human-computer interaction and programming control methods, such as creating simple games, graphic drawing programs, etc.
Product Tags:
|
|
10.1 Inch TFT LCD Screen with RGB Interface 300cd/m² Brightness and All Viewing Angle Images
|
